10K-600kw Ce ISO Biogas Power Plant Electric Gas Generator

• Output Type: AC Three Phase
• Gas Source: Biogas
• Certification: CE, ISO, CCC
• Power: ＞200kW
• Standard: Standard
• Power Usage: Daily Usage, Industrial Usage, Sell to Grid
• Controller: Comap, Deepsea
• Ignition System: Altronic
• Lube Oil: Total Gas Engine Oil 15W-40
• Voltage: 400/230V
• Lubrication Mode: Pressure and Splash
• Installation Service: Available Abroad
• Spare Parts: Factory OEM
• Alternator: Siemens: Brushless, with AVR, Insula
• Transport Package: Plywood Case with Plastic Film Inside
• Specification: Composition: CH4
• Origin: China
• Production Capacity: 5000sets/Year

Product Description

10k-600kw Ce ISO Biogas Power Plant Electric Gas Generator

1. Company Introduction

• Since 2008
• Factory area over 40000m2
• Starff over 260 employees
• Technicians over 100 people
• website wfhiger.en.made-in-china.com 

2. Scope of Application

         Waste to electricity, by farm waste biogas project, industry water waste biogas project, landfil project to get the biogas and realize the electricity generation.

3. Advantage

-----Advanced configuration keep accurate ans stable working condition under high speed working speed

-----High generalization, easy maintenance, low maintenance cost.

-----Economical, low operating cost

-----Reduced the carbon deposition on the wear of the engine cylinder and the valve to prolong the using life of the genset.

-----Adopt one of the world's most advanced gas control technology, fully available to the characteristics of fuel gas.

-----Powerful low pressure gas SPI (single point Injection) system used for various supercharger premixed engine.

-----Suitable for differnt concentration methane and propane, variety of quality gas.

-----Precise air-fuel ratio rarefied combustion control and Generator speed/load control

-----Realize lean burn, reduce the intake pipe tempering and improved efficient to reduce the heat load.

4.Biogas Genset Gas Requirements

 Within 1m from pressure regulating valve of gas intake

• Gas temperature ≤ 40ºC
• Pressure 3-20kpa, pressure changing rate ≤ 1kpa/min
• H2S ≤ 200mg/Nm3
• NH3 ≤ 20mg/Nm3
• CH4 content ≥40%, changing rate ≤ 2%min
• Impurity particle size ≤ 5μm, impurity content ≤ 30mg/Nm3
• Moisture content ≤ 40g/Nm3

5. High Configuration
 

• Ignition system: ALTRONIC(USA)
• Starting system: DC24V electric motor
• Mixer: IMPCO(USA)  
• Sparking plug:STITT
• Engine Control System: Woodward(USA), HEINZMANN(Germany)
• Electric Control System: ComAp(Czech), Deepsea(UK)
• Alternator: Siemens, LEROY-SOMER, Marathon