Ce ISO Standard 10-1000kw Natural Gas Generating Set/Electricity Power Plant

• Customization: Available
• Output Type: AC Three Phase
• Gas Source: Gas
• Power: ＞200kW
• Standard: Standard
• Power Usage: Daily Usage, Industrial Usage, Sell to Grid
• by Products: Hot Water for Heating House, Hot Steam
• Gas Pressure: 3-20kpa
• Lube Oil: Otal Gas Engine Oil 15W-40
• Lubrication Mode: Pressure and Splash
• Warranty: 12 Months
• Cooling Mode: Closed or Open Type Water Cooling
• Installation Abroad: Yes, Guide Installation
• Alternator: Siemens: Brushless, with AVR, Insula
• Controller: Comap, Deepsea
• Transport Package: Plywood Case 20/40gp Standard Container
• Specification: Composition: CH4
• Origin: China
• Production Capacity: 5000sets/Year

Product Description

Product Description
CE approved 10kw-1000kw Natural Gas Generator
1. +20 years professional manufacturer.
2. Wide power range: 10kw-5000kw gas generator, single or parallel running.
3. Multi-option of engine, alternator, control system and cooling system, PLC control panel.
4. Long continuous running hours, 8000 hours per year.
5. CE & ISO approved
6. OEM provided
7. Holding many patents
8. Perfect service system(Sales, Installation, Debugging and after-sale service)
 9. Full Range: our products mainly include natural gas generator, biogas generator, biomass generator, coal gas generator, syngas generator, coal-bed gas generator, coke oven gas generator, diesel generator etc. 
 
Product Features
Main spare parts:
1.Control system: America Woodward control system
2. Controller: ComAp, Deepsea, Woodward
3. Ignition system: American ALTRONIC, including:magneto, high-tension coil
4. Starting system: DC 24V electric motor. 
5. Mixer: IMPCO
6. Spark plug: STITT
 
Genset worksite requirements
The worksite needs to meet following basic requirements:
 a)  Ambient temperature between -40ºC~40ºC;
 b)  Relative humidity less than 95%(35ºC);
 c)  Site elevation not higher than 3500m;
 d)  For outdoor installation, simple rain shelter is required.
 
Requirements for Biogas
Within 1m from pressure regulation valve of gas intake
1. Gas Temperature≤40ºC 
2. Pressure 80~200kpa, Changing Rate≤1kpa/min
3. H2S≤20mg/Nm³
4. Content of CH4≥70%
5. Impurity Particle Size≤5μm, impurity content≤30mg/Nm³
6. Moisture Content≤40g/Nm³
Some Tips
Higher content of sulfur and ammonia is not only seriously corrodes the spark plug, but also increase the lubricant's acid value, and then gen-set internal parts will be corroded partly. That will shorten the gen-set's life time. So the gas scrubbing is very important!
Technical Parameters
Parameters for 10-600kw Natural Gas Gen-set

Parameter of 10-600kw Natural Gas Generator Set
Model Number	LHNG
Prime Power	8-480KW
Rated Power	10-600KW
Gas Mixed Mode	Outside
Rated Speed	1500rpm/1000rpm
Rated Frequency	50/60Hz
Rated Voltage	400V/230V
Rated Current	18-1080A
Phase	AC 3-Phase, 4 Wire
Gas Pressure	80-200kpa
Intake Mode	Natural Intake/Supercharging and Inter Cooler
Voltage Stability	≤±2%
Voltage Transient	≤±10%
Voltage Stable Time	≤1s
Heat Consumption	≤9.8mj/kw.h
Lubricant Consumption	1-1.3g/kw.h
Noise	75-105dB(A)
Cylinder Number	4/6/12
Cylinder Bore	100/105/135/138/190mm
Starting System	DC 24V Electric Motor
Sparking Mode	Spark Plug
Cooling Method	Circlulating Water Cooling
Lubricant Method	Passive and Flying Lubricant
Isolation Class	H
Protection	IP23
Alternator	Siemens, Standford, Leroy Somer, Marathon, etc.
Power Factor	0.8 Lagging
Exciting Method	Brushless
Colour	You Decide
Certificates	ISO 9001:2008, CE
Warranty	1 Year
Overheal Time	More Than 30000h
Type	Open
Control System	Automatic Alarm System
Size	1450*700*1100mm~6000*1970*2735mm
Weight	600kg~12000kg

Service 
 
1.pre-sale service:
(1)We will send our engineer to prospect the site of power station free to charge.
 
(2)According to the situation of site we can supply you many drawings:like power station floor plan,
engineering flow sheet of circle cooling system,genset installation,genset foundation,electrical connection and some other techincal support etc.
 
2.Sale service:
(1)we will send our engineer to the site to guide you the installation of generator set, subsystem and relative equipment.
 
(2)We will debug the generator set till it can generate power successfully.
 
(3)We will also supply a technical training to the operators.Orcan send your staff to our company.We can train you till you can operate the generator set.
 
3.After-sale service:
(1)Our every engineers are in charge of different area,we will response periodically and support you 
technical service free of charge,
 
(2)For the quality problem, we will service for you free of charge during the guarantee period.
 
(3)One year guarantee period and lifetime service.
 
(4)we solve quality problem in time when genset doesn't work,We insure to help our clients to gain the biggest economic profit.
 

FAQ:
1.How to choose the right model? 
A: It depends on real output power, Voltage, Frequency and gas type.  
2.What is the oil consumption and capacity per hour? 
A: 1.0-1.63g of lubricant oil consumption per hour. 1.0 Cubic meter gas can produce 1.5-3.0kw/h power. The capacity depends on gas energy. E.g 1.0 Cubic meter natural gas produce about 3.0kw/h  
3.What is the overhaul? 
  A: About 30000 working hours. A week is enough to finish.  
4. What is the warranty? 
    A: 1 year. Inside this 1 year, we offer all spare parts free of charge. After this period, spare      parts are not free. But, a set of spare parts will be shipped together with machine free.  
5. How is the service? 
A: We offer installation,repair and maintain service abroad. And online guide service if needed anytime. Our before-sale, in-sale and after-sale service are all trustable, you can name it.