| Output Type: | AC Three Phase |
|---|---|
| Gas Source: | Gas |
| Certification: | CE, ISO, CCC |
| Power: | ＞200kW |
| Standard: | Standard |
| Power Usage: | Daily Usage, Industrial Usage, Sell to Grid |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier Product Description
CE approved turnkey plant 50kw-5mw biomass gasification power plant
1. +10 years gas engine manufacturer.
2. Wide power range: 10kw-700kw, single or parallel running.
3. Multi-option of engine, alternator, control system and cooling system, PLC control panel.
4. Long continuous running hours, 8000 hours per year.
5. CE & ISO approved
6. OEM provided
Product Features
Main spare parts:
1. Control system: America Woodward control system
2. Controller: ComAp, Deepsea, Woodward
3. Ignition system: American ALTRONIC, including:magneto, high-tension coil
4. Starting system: DC 24V electric motor.
5. Mixer: IMPCO
6. Spark plug: STITT
Main technical parameters:
| Parameter of Biomass Generator Set | |
| Model Number (Engine Type) | LHBMG10-700 |
| Brand Name | LVHUAN |
| Prime power/Standby power | 8kw-560kw/10kw-700kw |
| Rated Speed | 1000/1200-1500/1800 rpm |
| Rated Frequency | 50/60Hz |
| Rated Voltage | 400V/230V |
| Phase | AC 3-Phase, 4 wire |
| Voltage Stability | ≤±2% |
| Voltage transient | ≤±10% |
| Voltage Stable time | ≤1s |
| Heat consumption | ≤9.8mj/kw.h |
| Lubricant consumption | ≤1.0g/kw.h |
| Engine Capacity | 1.81-71.45 L |
| Cylinder Number | 2-12 |
| Cylinder Bore | 100-190mm |
| Stroke | 115-210mm |
| Starting System | DC 24V electric motor |
| Cooling method | Water cooler |
| Lubricant method | Passive and flying lubricant |
| Isolation class | H |
| Protection | IP23 |
| Alternator | Siemens, Standford, Leroy Somer, Marathon, etc. |
| Power Factor | 0.8 lagging |
| Exciting method | brushless |
| Colour | your choice |
| Certificates | ISO 9001:2008, CE |
| Warranty | 1 year |
| Type | Open |
| Control system | Automatic alarm system |
| Size | 1450x700x1100mm-6200x2100x2800mm |
| Weight | 700kg-12500kg |
Genset worksite requirements
The worksite needs to meet following basic requirements:
a) Ambient temperature between -40ºC~40ºC;
b) Relative humidity less than 95%(35ºC);
c) Site elevation not higher than 2500m;
d) For outdoor installation, simple rain shelter is required.
Gas requirements of genset
1. Temperature of biomass≤40ºC
2. Pressure of biomass 5~20kPa, velocity of pressure≤ 1kPa/min;
3.H2S≤200mg/Nm3;
4. NH3≤20mg/Nm3
5. Coke tar content≤20mg/Nm3;
6. Impurities particle size≤5μm; impurity content≤30mg/Nm3;
7. Moisture Content of biomass ≤40g/Nm3;
8. Biomass calorific value≥4.2MJ/Nm3.
Service committee:
1. Pre-sale service:
1) We will send our engineer to prospect the site of power station free of charge.
2) According to the situation of site, we will provide design drawings, such as power plant floor drawing, cooling system drawing, genset foundation, control room design, etc.
2. Sale service:
1) Operator training would be conducted by Lvhuan technicians during the process of commissioning or Factory training course in China,
2) Installation and commission of the genset would be instructed assisted by Lvhuan technicians at site.
3. After-sale service:
1) We have strong after-sale team, we will response within 24 hours and provide technical supports by phone or site guiding, help our clients to gain the biggeset profit.
2) For the quality problem, we will service for you free of charge during the guarantee period.
3) We provide one year guarantee period and lifetime service.
Plentiful spare part supply:
1. We have spart parts department, plentiful spare part supply for all genset model will guarantee genset lifetime running.
2. All parts were from original factories or professional factories,complete in specification, keep good quality.
Biomass generator Service :
1.pre-sale service:
We will send our engineer to prospect the site of power station free to charge.According to the situation of site we can supply you many drawings which can meet the requirement of design and construction,like power station floor plan,engineering flow sheet of circle cooling system,genset installation,genset foundation,electrical connection and some other techincal support etc.
2.Sale service:
we will send our engineer to the site to guide you the installation of generator set, subsystem and relative equipment.We will debug the generator set till it can generate power successfully.We will also supply a technical training to the operators.You also can send your staff to our company.We can train you till you can operate the generator set and during this time we can offer you board and lodging free of Charge.
3.After-sale service:
(1)in our company, different people is in charge of different area,we will response periodically and support you technical service free of charge,include equipment debugging,fault eliminating,technical advice,maintenance assistant,etc.
(2)For the quality problem, we will service for you free of charge during the guarantee period.
(3)One year guarantee period and lifetime service.
(4)Insisting on principle of "solving problems first,trying to recover the generator set as soon as possible and then analysis the reason",we solve quality problem in time when genset doesn't work,We insure to help our clients to gain the biggest economic profit.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}