| Customization: | Available |
|---|---|
| Output Type: | AC Three Phase |
| Gas Source: | Gas |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Biogas generator core features :
Original manufacturer supply
Rate power supply range: 10kw - 700kw
Prime power supply range: 8kw - 560kw
Capacity: 1CBM biogas produce 1.5-2.5kw.h power
Fuel: Household waste, animal waste, other organic exist in waste water and rubbish etc.
Biogas generator specification :
|
Model Number |
LHBG10-700 |
|
Brand Name |
Lvhuan/JDEC |
|
Rated Power |
10-700 |
|
Rated Speed |
1000/1500rpm |
|
Rated Frequency |
50/60 Hz |
|
Rated Voltage |
400/230V/6.3KV/10.5KV |
|
Phase |
AC 3 phase 4 wire |
|
Starting system |
24V DC electric motor |
|
Cooling method |
water cooler |
|
Lubricant method |
passive and splash |
|
Isolation class |
H |
|
Protection |
IP23 |
|
Power Factor |
0.8 lagging |
|
Exciting method |
Brush less |
|
Voltage Stability |
≤±2% |
|
Voltage Transient |
≤±10% |
|
Voltage Stable time |
≤1 s |
|
Engine Capacity |
1.81-95L |
|
Cylinder Number |
2-16 |
|
Cylinder Diameter |
100-190mm |
|
Range |
115-210mm |
|
Heat consumption |
≤10mj/kw.h |
|
Oil consumption |
≤1.63g/kw. |
Biogas generator features:
1.Pure copper water tank for best cooling effect
2.Famous component brand to ensure overall quality
3.Expansion fitting combined with shrinking fitting give high tightness to the system
4.Safety guarantee form electromagnetic valve as well as back-fire relief valve
5.Residual heat CHP recycle system available for choice.
Biogas generator Supply details:
Ignition system:We adopt ignition system of magneto which produced by American ALTRONIC company,including:magneto,high-tension coil,sparking plug.
Starting system: DC24V electric motor,12v190 adopt ST710 of direct-current.
Pressure charging system:Pulse Mixed-flow supercharger, compression ration is 1:8,meet engine's requirement for gas-flow rate.
Speed regulating system: EGS gas controller of American WOODWARD Company.
Biogas generator work site requirements:
The work site needs to meet following basic requirements:
a) Ambient temperature between -40ºC~40ºC;
b) Relative humidity less than 95%(35ºC);
c) Site elevation not higher than 2500m;
d) For outdoor installation, simple rain shelter is required.
Biogas generator fuel gas requirement:
1m distance away from generator set's pressure regulating valve of inlet
Temperature of biogas ≤40ºC;
Pressure of biogas 5~20kPa, velocity of pressure≤ 1kPa/min;
H2S≤200mg/Nm3;
NH3≤20mg/Nm3;
Coke tar content≤20mg/Nm3;
Impurities particle size≤5μm; impurity content≤30mg/Nm3;
Moisture Content of biogas ≤40g/Nm3;
Biogas gas calorific value≥4.2MJ/Nm3.
Purification of biogas have a significant impact on machine life and continuous running time!
){kind=link}