| Customization: | Available |
|---|---|
| Output Type: | AC Three Phase |
| Gas Source: | Gas |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1.Our advantage:
1)manufacturer for 10 years
2)Capacity: 20-1000KW
3)High power and maximum efficiency
4)Low operating costs as a result of low levels of lubricant and fuel consumption
5)Low emissions due to state-of-the-art combustion technologies
6)Low space requirement due to compact design
7)Long service life resulting from application-specific design
8)Multi-option of control pane
2.Gas Requirements For Biogas Generator/Gas Generator
Within 1m to the intake valve of gas generator set
1) Gas temperature ≤ 40ºC
2) Pressure 3-20kpa, pressure changing rate ≤ 1kpa/min
3) H2S ≤ 200mg/Nm3
4) NH3 ≤ 20mg/Nm3
5)CH4 content ≥40%, changing rate ≤ 2%/min
6)Impurity particle size ≤ 5μm, impurity content ≤ 30mg/Nm3
7)Moisture content ≤ 40g/Nm3
3. Worksite requirements for biogas generator
a) Ambient temperature between -40ºC~45ºC;
b) Relative humidity less than 90%(35ºC);
c) Site elevation not higher than 2000m;
d) For outdoor installation, simple rain shelter is required.
4.Parameters of 500kw biogas generator/electric generator
| Prime Power/Standby Power | 400KW/500KW |
| Voltage Stability | ≤±2% |
| Voltage transient | ≤±10% |
| Voltage Stable time | ≤1s |
| Heat consumption | ≤11mj/kw.h |
| Engine Capacity | 71.45 L |
| Cylinder Number | 12-V |
| Lubricant method | Passive and flying lubricant |
| Isolation class | H |
| Protection | IP23 |
| Colour | customized |
| Control system | Automatic alarm system |
Biogas generator CHP:
CHP system,short for Combined Heat & Power is a simultaneous production of cooling, heating and power system with efficiency of about 90%.
When the generator is working, theheat will be offered at the same time, it is the utilizing separate unit for hospital,office building,living apartment,breeding enterprise, vegetable green house etc.
The energy source for CCHP system:
Exhaust gas: The water will get heat form needle tubing when flows through the recovery devices of exhaust gas. And the needle tube's function is to conduct heat form gas, is fixed at the recovery device of exhaust gas. During the process, the water temperature will be heated up to 50~90ºC. Another result is the heated water becomes saturated steam under certain pressure.
The heat recovery efficiency will takes about 20-30% of total heat consumption of genset. But total gas exhaust heat takes about 32%.
Cylinder water : the cooling water( jacket water and oil cooling water) gathered together is another hot water source for CCHP system. This part of heat recovery takes about 32% of total heat consumption of genset.
Biogas generator CHP Application:
1.Heating &bathing
2.Warming the anaerobic tank to increase biogas capacity.
3.Drying the starch
4.Production of vapour
5.Cooling model of air condition for building and household.
Biogas generator features:
1.Pure copper water tank for best cooling effect
2.Famous component brand to ensure overall quality
3.Expansion fitting combined with shrinking fitting give high tightness to the system
4.Safety guarantee form electromagnetic valve as well as back-fire relief valve
5.Residual heat CHP recycle system available for choice.
Biogas generator Supply details:
Ignition system:We adopt ignition system of magneto which produced by American ALTRONIC company,including:magneto,high-tension coil,sparking plug.
Starting system: DC24V electric motor,12v190 adopt ST710 of direct-current.
Pressure charging system:Pulse Mixed-flow supercharger, compression ration is 1:8,meet engine's requirement for gas-flow rate.
Speed regulating system: EGS gas controller of American WOODWARD Company.
){kind=link}