| Customization: | Available |
|---|---|
| Output Type: | AC Three Phase |
| Gas Source: | Gas |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
10kw 200kw 1100 Kw CHP Cogeneration Natural Gas Generator Set
Natural gas---its main component is CH4,which takes 90% of the whole content. The displacement of NOX, CHM and Co from burning are much lower the state standards and without dust pollution; thermal efficiency of conversion is 65%, which is same to the LPG and higher than Coal; Calculated on the same calorific value, the price of natural gas is lower than the price of coal and petroleum. Natural gas is used by civil use, generation, industrial chemicals and industrial fuel etc. it's a good substitute of coal and petroleum. It can take instead of civil coal gas; it can be used as nitrogenous fertilizer instead of coal and petroleum; it can be used as ethylene instead of naphtha; it can be used as the car engine fuel instead of petroleum.
Model Number |
LHBG/LHNG 10-1100 |
Continious output power |
8KW-1000KW |
Instantaneous output power(max) |
10-1100KW |
Rated Speed |
1800/1500/1000/1200rpm |
Rated Frequency |
50/60 Hz |
Rated Voltage |
400/230V(applied to 110V/220V/240V/380V/440V/480V) |
Connect method |
AC 3 phase 4 wire |
Starting system |
24V DC electric motor |
Cooling method |
open/closed water cooling |
Lubricant method |
pressure and splash |
Isolation class |
H |
Protection |
IP23 |
Standard |
JB/T9583.1-99 |
Exciting method |
Brush less |
Voltage Stability |
≤±2% |
Voltage Transient |
≤±10% |
Voltage Stable time |
≤1 s |
Engine Capacity |
1.81-71.45L |
Cylinder Number/ Diameter/ Stroke |
2-12pcs /100-190mm/115-210mm |
Gas mixing type |
outside of cylinder |
MIXER |
IMPCO |
Gas heat consumption |
≤9.8-11.63mj/kw.h |
Oil consumption |
≤1.63g/kw.h |
Service
1.pre-sale service:
(1)We will send our engineer to prospect the site of power station free to charge.
(2)According to the situation of site we can supply you many drawings:like power station floor plan,
engineering flow sheet of circle cooling system,genset installation,genset foundation,electrical connection and some other techincal support etc.
2.Sale service:
(1)we will send our engineer to the site to guide you the installation of generator set, subsystem and relative equipment.
(2)We will debug the generator set till it can generate power successfully.
(3)We will also supply a technical training to the operators.Orcan send your staff to our company.We can train you till you can operate the generator set.
3.After-sale service:
(1)Our every engineers are in charge of different area,we will response periodically and support you
technical service free of charge,
(2)For the quality problem, we will service for you free of charge during the guarantee period.
(3)One year guarantee period and lifetime service.
(4)we solve quality problem in time when genset doesn't work,We insure to help our clients to gain the biggest economic profit.
FAQ:
1.How to choose the right model?
A: It depends on real output power, Voltage, Frequency and gas type.
2.What is the oil consumption and capacity per hour?
A: 1.0-1.63g of lubricant oil consumption per hour. 1.0 Cubic meter gas can produce 1.5-3.0kw/h power. The capacity depends on gas energy. E.g 1.0 Cubic meter natural gas produce about 3.0kw/h
3.What is the overhaul?
A: About 30000 working hours. A week is enough to finish.
4. What is the warranty?
A: 1 year. Inside this 1 year, we offer all spare parts free of charge. After this period, spare parts are not free. But, a set of spare parts will be shipped together with machine free.
5. How is the service?
A: We offer installation,repair and maintain service abroad. And online guide service if needed anytime. Our before-sale, in-sale and after-sale service are all trustable, you can name it.
){kind=link}