| Customization: | Available |
|---|---|
| Output Type: | AC Three Phase |
| Gas Source: | Biogas |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
10kw-4500kw gas engine Biogas Power Generator
1. Company Introduction
Since 2008
Factory area over 40000m2
Starff over 260 employees
Technicians over 100 people
2. Scope of Application
Waste to electricity, by farm waste biogas project, industry water waste biogas project, landfil project to get the biogas and realize the electricity generation.
3. Advantage
Advanced configuration keep accurate ans stable working condition under high speed working speed
High generalization, easy maintenance, low maintenance cost.
Economical, low operating cost
Reduced the carbon deposition on the wear of the engine cylinder and the valve to prolong the using life of the genset.
Adopt one of the world's most advanced gas control technology, fully available to the characteristics of fuel gas.
Powerful low pressure gas SPI (single point Injection) system used for various supercharger premixed engine.
Suitable for differnt concentration methane and propane, variety of quality gas.
Precise air-fuel ratio rarefied combustion control and Generator speed/load control
Realize lean burn, reduce the intake pipe tempering and improved efficient to reduce the heat load.
4. High Configuration
Ignition system: ALTRONIC(USA)
Starting system: DC24V electric motor.
Mixer: IMPCO(USA)
Sparking plug:STITT
Engine Control System: Woodward(USA), HEINZMANN(Germany)
Electric Control System: ComAp(Czech), Deepsea(UK)
Alternator: Siemens, LEROY-SOMER, Marathon
5.Gas Requirements of Biogas Genset
Within 1m from pressure regulating valve of gas intake
Gas temperature ≤ 40ºC
Pressure 3-20kpa, pressure changing rate ≤ 1kpa/min
H2S ≤ 200mg/Nm3
NH3 ≤ 20mg/Nm3
CH4 content ≥40%, changing rate ≤ 2%min
Impurity particle size ≤ 5μm, impurity content ≤ 30mg/Nm3
Moisture content ≤ 40g/Nm3
Generator Supply Scope:
1.Brand new Cummins Biogas generator
2.Brand new Stamford,Leroy somer, Marathon,AC atlernator, Ratings:400/230V, 3Ph, 50Hz, 1500Rpm, 0.8PF, IP23, H insulation class
3.Radiator with engine driven fan mounted on skid.
4.Deepsea,Comap,Harsen,Smartgen Set mounted control panel
5.Anti-vibration mountings as to ensure the compete genset running under stablilization.
6.24V DC Electric start system and engine driven battery charger, lead-acid type starting batteries
7.Industrial silencers with flexible connects and elbow
8.Base fuel tank, with fuel gauge integrated in the base frame of generating set
9.Test report of generator, Set of drawings and O&M manuals
10.Optional Choice:Soundproof, ATS (automatic transfer switch), AMF panel, Trailer, Parallel system by your extra choose Engine:
Model Number |
LHBG/LHNG 10-1100 |
Continious output power |
8KW-1000KW |
Instantaneous output power(max) |
10-1100KW |
Rated Speed |
1800/1500/1000/1200rpm |
Rated Frequency |
50/60 Hz |
Rated Voltage |
400/230V(applied to 110V/220V/240V/380V/440V/480V) |
Connect method |
AC 3 phase 4 wire |
Starting system |
24V DC electric motor |
Cooling method |
Open/closed water cooling |
Lubricant method |
Pressure and splash |
Isolation class |
H |
Protection |
IP23 |
Standard |
JB/T9583.1-99 |
Exciting method |
Brush less |
Voltage Stability |
≤±2% |
Voltage Transient |
≤±10% |
Voltage Stable time |
≤1 s |
Engine Capacity |
1.81-71.45L |
Cylinder Number/ Diameter/ Stroke |
2-12pcs /100-190mm/115-210mm |
Gas mixing type |
Outside of cylinder |
MIXER |
IMPCO |
Gas heat consumption |
≤9.8-11.63mj/kw.H |
Oil consumption |
≤1.63g/kw.H |
Description:
This type of generator is choose gas as power.Gas will be burned directly inside of engine's cylinders, then give machinery force to alternator to produce electricity power.There are mainly 3 parts on one generator set:Gas engine,alternator and radiator.The generated power can be connect to national grid, or for daily use and industrial use.
FAQ:
1. Are you factory? and where is your factory?
Yes, we are. Our factory is located in Zhangqiu Longshan subdistrict, Jinan city, Shandong province, Welcome to visit our factory.
2. How to choose the right model?
To choose a right model, we need to know required continuous output power, local voltage and frequency and fuel (such as diesel, natural gas, biogas, biomass gas, coal gas, syngas, etc.). For biomass power plant and coal gas power plant, some clients may doesn't have gasification system, then we need information about raw material.
3. What's the genset warranty?
The warranty is one year. We will offer free service and spare parts during warranty period. Lifetime service will be provided by our trustworthy after-sale team.
4. How to do the maintenance?
Operator training will be provided by our technician. After training, local operator can do the basic maintenance by themselves according to our maintenance manual.
5. Will be operation training offered?
Yes, operator training would be conducted by our technicians during the process of commissioning or factory training course in China.
6. What's about the installation and commissioning?
Installation and commissioning of the genset would be instructed assisted by our technicians on site.
7. What is your regular delivery time?
30 days after order releasing.
){kind=link}