500 Kw ISO Quality Standard Energy Efficient Natural Gas Generator

• Output Type: AC Three Phase
• Gas Source: Gas
• Certification: CE, ISO, CCC
• Power: ＞200kW
• Standard: Standard
• Power Usage: Daily Usage, Industrial Usage, Sell to Grid
• by Products: Hot Water for Heating House, Hot Steam
• Gas Pressure: 3-20kpa
• Lube Oil: Otal Gas Engine Oil 15W-40
• Lubrication Mode: Pressure and Splash
• Warranty: 12 Months
• Cooling Mode: Closed or Open Type Water Cooling
• Installation Abroad: Yes, Guide Installation
• Alternator: Siemens: Brushless, with AVR, Insula
• Controller: Comap, Deepsea
• Transport Package: Plywood Case 20/40gp Standard Container
• Specification: Composition: CH4
• Origin: China
• Production Capacity: 5000sets/Year

Product Description

Natural Gas Generator

Natural gas---its main component is CH₄,which takes 90% of the whole content. The displacement of NO_X, CH_M and Co from burning are much lower the state standards and without dust pollution; thermal efficiency of conversion is 65%, which is same to the LPG and higher than Coal; Calculated on the same calorific value, the price of natural gas is lower than the price of coal and petroleum. Natural gas is used by civil use, generation, industrial chemicals and industrial fuel etc. it's a good substitute of coal and petroleum. It can take instead of civil coal gas; it can be used as nitrogenous fertilizer instead of coal and petroleum; it can be used as ethylene instead of naphtha; it can be used as the car engine fuel instead of petroleum.

 

 
Natural Gas Generator
Ignition system:We adopt ignition system of magneto which produced by American ALTRONIC company,including:magneto,high-tension coil,sparking plug.
Starting system: DC24V electric motor,12v190 adopt ST710 of direct-current.
Pressure charging system:Pulse Mixed-flow  supercharger, compression  ration is  1:8,meet engine's  requirement   for gas-flow rate.
Speed regulating system:EGS gas controller of American WOODWARD Company.
scope of application:Biogas generator set is widely used in the many area where can generate biogas,like rubbish landfill,livestock excrement disposal,industrial organism disposal.
 
Natural Gas Generator
Requirements for natural gas:
Within 1m from pressure regulating value of gas intake;
The ratio of CH₄ in natural gas ≥70%;
Pressure of natural gas:80-200 kpa, rate of pressure change <1 kpa/min;
H₂S<20mg/nm^3;
Moisture content <40 g/Nm³;
Impurity particle size <5µm, impurity content <30 mg/Nm³

Service 
 
1.pre-sale service:
(1)We will send our engineer to prospect the site of power station free to charge.
 
(2)According to the situation of site we can supply you many drawings:like power station floor plan,
engineering flow sheet of circle cooling system,genset installation,genset foundation,electrical connection and some other techincal support etc.
 
2.Sale service:
(1)we will send our engineer to the site to guide you the installation of generator set, subsystem and relative equipment.
 
(2)We will debug the generator set till it can generate power successfully.
 
(3)We will also supply a technical training to the operators.Orcan send your staff to our company.We can train you till you can operate the generator set.
 
3.After-sale service:
(1)Our every engineers are in charge of different area,we will response periodically and support you 
technical service free of charge,
 
(2)For the quality problem, we will service for you free of charge during the guarantee period.
 
(3)One year guarantee period and lifetime service.
 
(4)we solve quality problem in time when genset doesn't work,We insure to help our clients to gain the biggest economic profit.
 

FAQ:
1.How to choose the right model? 
A: It depends on real output power, Voltage, Frequency and gas type.  
2.What is the oil consumption and capacity per hour? 
A: 1.0-1.63g of lubricant oil consumption per hour. 1.0 Cubic meter gas can produce 1.5-3.0kw/h power. The capacity depends on gas energy. E.g 1.0 Cubic meter natural gas produce about 3.0kw/h  
3.What is the overhaul? 
  A: About 30000 working hours. A week is enough to finish.  
4. What is the warranty? 
    A: 1 year. Inside this 1 year, we offer all spare parts free of charge. After this period, spare      parts are not free. But, a set of spare parts will be shipped together with machine free.  
5. How is the service? 
A: We offer installation,repair and maintain service abroad. And online guide service if needed anytime. Our before-sale, in-sale and after-sale service are all trustable, you can name it.